Upgrading Home Power, Smart Lighting, and Electrical Safety

Old electrical wiring is one of the top causes of house fires and major safety hazards. For this complete home project, EIS Electrical was brought in to do a full, top to bottom house rewire. We replaced all the old, degraded cables with a brand new, high performance power system that meets all modern safety and building regulations.

Rewiring a full house takes careful planning from mapping out the circuits to running cables through the walls and fitting the final switches and sockets. Our team stripped out every outdated circuit and installed a modern fuse box, energy saving LED downlights, dedicated high power lines for heavy appliances, and eco friendly solar panels on the roof. This complete upgrade keeps the home completely safe, drops energy bills, and makes sure the property can easily handle modern technology.

Mapping Out the Wiring Plans First

Before we open up a single wall, our team carefully reviews and draws up detailed electrical floor plans. These blueprints show the exact location of every single light, heavy appliance line, and plug socket throughout the entire house.

Running the First Cables Through the Framing

While the building is being opened up or renovated, our team runs long stretches of high quality, low smoke electrical cabling through the open wooden roof frames and floor joists. We keep all the cable paths neatly organized and firmly secured to protect them from any future damage.

Installing a Modern Fuse Box and Power Connections

We replaced the original, unsafe fuse box with a modern, multi way digital consumer unit where every circuit has its own individual safety switch (RCBO). This ensures that if a single electrical fault happens in one room, it won't trip the whole house and plunge the entire family into darkness.

Fitting Sleek, Energy Saving Ceiling Downlights

As the rooms move into the plastering and painting stage, we carefully cut the holes and connect the recessed ceiling downlights. These sleek LED fixtures provide bright, energy saving light throughout your living spaces.

Fitting the Final Switches and Sockets

Once the walls are plastered and dried, our team returns to fit the final plates. This includes installing sleek chrome or clean white switches, multi plug wall sockets, and wall mounted TV and media hubs so everything blends perfectly with the look of your home.

Installing Outdoor Lights and Motion Sensors

Safety and convenience matter just as much on the outside of your property. Using sturdy safety ladders, our team installs weatherproof outdoor downlights and automated motion sensor security spotlights neatly right under the roof edges.

Adding Solar Panels to the Roof for Clean Energy

To drastically cut long term energy bills, we upgraded the home with a rooftop solar panel system. Our team safely manages the high voltage direct current (DC) power lines running from the roof down to the indoor storage batteries and inverters.

Staying On Site with Our Fully Stocked Vans

A full house rewire takes a lot of moving parts, so having the right gear on hand is essential. Our branded service vans stay parked right outside your property throughout the multi week project, packed with all the certified parts and tools we need to keep the job moving forward smoothly without any delays.

Is your home running on outdated wiring, or are you planning a major home renovation?

CONTACT EIS ELECTRICAL TODAY!